News – Announcements

03Jun

Project Manager Position

CIVIL ENGINEER/ARCHITECT/MECHANICAL ENGINEER AS RESEARCH PROJECT MANAGER We are seeking a highly motivated individual who will work as Project Manager of a H2020 European funded project focused on Energy Efficiency in Buildings. For more information please click here:
06Apr

Data ENGINEER position

We are seeking a highly motivated individual who will work as Data Engineer of a H2020 European funded project. For more information please click here:
03Apr

SMARTFAN WEBINAR

Last week #SMARTFAN Pilot Line for continuous CF Additive Manufacturing was presented for educational and training reasons to 100 students from a private and local school. #LTCP (Lavrion Technological Cultural Park) and #BIOG3D were co-organisers of the event, which included: Presentation of the basic principles of 3D printing with continuous CF Live demonstration of operation […]
24Mar

iclimabuilt KICK OFF MEETING

The #iclimabuilt #H2020 project has been officially launched! Thekick-off meeting was held on 22nd and 23rd of March. Iclimabuiltprimary focus is to reduce energy use and the environmental impact ofbuildings by developing and bringing to market new technologicalsolutions. We have a very worthy consortium of 27 Partners from 14 countries, whoare all one of the […]
16Mar

Athens Science Virtual Festival 2021 – An era of heroes

The aim of #ASF this year is to recognize and honor the role and contribution of scientists and the scientific community in our daily lives. R-NanoLab will present #SMARTFAN and #Repair3D pilot lines during #ASF with live demonstration.”The Age of Heroes” is here! Let ‘s explore it all together, in another exciting Science Festival: ASF 2021! #asf #ASF2021 #AthensScienceFestival
16Mar

Συνεργασια εργαστηριων ΕΜΠ για την κατασκευη προηγμενων πειραματικων διαταξεων

To Εργαστήριο Ναυτικής και Θαλάσσιας Υδροδυναμικής (ΕΝΘΥ) της Σχολής Ναυπηγών Μηχανολόγων Μηχανικών συνεργάστηκε επιτυχώς με το Εργαστήριο Προηγμένων & Συνθέτων, Νανοϋλικών, Νανοδιεργασιών και Νανοτεχνολογίας (R-NanoLab) της Σχολής Χημικών Μηχανικών για την κατασκευή πρότυπου σκάφους με ιδιαίτερα γεωμετρικά χαρακτηριστικά και αυξημένη πολυπλοκότητα. #3dprinting #additivemanufacturing #unmannedsurfacevehicle #autonomousunderwatervehicle #navalengineering #chemicalengineering #ntua
13Mar

Open Day Workshop of Repair3D Project

We are delighted to announce that the 1st Open Day Workshop of #Repair3D Project, organised by #CNAT, was held online on the 1st of March 2021 and it was very insightful and inspiring! All #Repair3D partners delivered high-quality, interesting and well presented content. We thank them all for sharing their thoughts and ideas with us. Most of all, […]
03Mar

Junior researcher in Research Integrity and Research Ethics

We are seeking a highly motivated individual who will work as a researcher at H2020 European funded projects focused on Research Integrity and Research Ethics. Field of research: Social Sciences, Humanities, Research Ethics/Bioethics, Research Integrity
27Feb

Meet FAST-SMART Project through its first Newsletter!

#energy #harvesters #piezoelectrics #thermoelectrics #photovoltaics #recycling Meet FAST-SMART Project through its first Newsletter! R-NanoLab is proud to be Leader of WP5 “Materials Recycling and Parts Reuses”. Visit the Website: http://www.fast-smart.org/
26Feb

#Repair3D project completed 2 Years of success!

#Repair3D project completed 2 Years of success! Despite the difficulties that COVID-19 has caused, all #Repair3D partners have done a great work! Research achievements were presented and the most promising materials and technologies were selected to continue with the demonstrators development! #recycling #composites #thermoplastics #3D printing
29Jan

SMARTFAN 36M Review Meeting

SMARTFAN project has reached 3 Years of success with several scientific and technological achievements! On the 28th of January, the 36M Review Meeting took place. Many thanks to all project partners who participated in this virtual meeting, as well as to our Project Officer and Monitor. Stay tuned! #smart #composites #self-morphing #self-healing # self-sensing
22Jan

Domminio kick off meeting

#domminio kick off meeting on-air! Happy to be part of this newly launched #Horizon2020 project and strong consortium team! #domminio “Digital method for imprOved Manufacturingof next-generation MultIfuNctIOnal airframe parts”is the new #H2020 project coordinated by AIMEN. #domminio aims at developing an innovative data-driven methodology to #design, #manufacture, maintain and pre-certify #multifunctional and #intelligent airframe parts. […]
13Jan

Senior researcher data Scientist

We are seeking a highly motivated individual who will work as Data Scientist of a H2020 European funded project. For information please click on the link bellow:
30Dec

Junior researcher position in Research Ethics and Research Integrity

Field of research: Social Sciences, Humanities, Research Ethics/Bioethics, Research Integrity We are seeking a highly motivated individual who will work as a junior researcher at H2020 European funded projects focused on Research Ethics and Research Integrity. For information please click on the link bellow:
22Dec

first Core Group meeting of EsSENce COST Action

The first Core Group meeting of EsSENce COST Action was held on 18th December! All the WGs Leaders, Co-Leaders as well as the Committees Coordinators met and worked virtually with the aim of schedule the upcoming WG meeting and the launch of the STSMs. Looking forward to a productive year! #COST#carbon#composites#smart#sensing#network
15Dec

CHARISMA KICK OFF MEETING

The #H2020CHARISMA project has been officially launched on! The kick-off meeting was held on the 10th and 11th of December. CHARISMA (Characterisation and Harmonisation for Industrial Standardisation of advanced MAterials) aims to harmonise #Raman characterisation of materials, developing: i) hardware and reference master samples, ii) algorithms and protocols for spectra acquisition and computational quantitative analysis, […]
15Dec

imPURE Press Release

INJECTION MOULDING REPURPOSING FOR MEDICAL SUPPLIES ENABLED BY ADDITIVE MANUFACTURING Please downlod here
04Dec

impure kick 0ff meeting

imPURE project (Injection Moulding Repurposing for Medical Supplies Enabled by Additive Manufacturing) has officially started on 1st of December and it aims to repurpose injection moulding lines, by integrating modular moulds with interchangeable cavity plates, in order to meet the urgent needs of our societies for vital medical supplies and equipment. imPURE is an Horizon 2020 EU Innovation […]
04Dec

Carbo4power kick off meeting

The #Carbo4Power #H2020 project has been officially launched! The kick-off meeting was held on 26th and 27th of November. Carbo4Power focuses on novel #materials for #renewableenergy that will develop a new generation of #offshore #turbine #blades for wind and tidal applications. We have a very worthy consortium that are all one of the best in […]
24Nov

New H2020 Project: Carbo4Power

National Technical University of Athens (NTUA)/ R-Nano Lab is excited to announce the start of the new 4-years project Carbo4Power, funded by the European Commission under the #H2020 programme. With a multidisciplinary consortium of 18 partners (10 RTOs and 8 SMEs from 8 EU countries) coordinated by NTUA, Carbo4Power will develop a new generation of […]
13Nov

The 5th SmartFan Newsletter

The 5th SmartFan Newsletter has been released! Partners research achievements as well as the first results of the demonstrators are presented. Take a look! @Smartfan #carbon #fibres #smart #composites #demonstrators
09Nov

COST press release

High-performance Carbonbased composites with Smart properties for Advanced Sensing Applications #COST#carbon#composites#smart#sensing#network
22Oct

Research integrity: nine ways to move from talk to walk

Research Performing Organisations will gain inspiration from the SOPs4RI Project toolbox to develop their own research integrity promotion plans. Stay tuned, since the toolbox will continue expanding in scope and in content; next year SOPs4RI will include resources for Research Funding Organisations and will start integrating guidelines that have been constructed via a wide consultation process that […]
22Oct

Plastics Circularity Multiplier Conference

Prof. Costas Charitidis as Scientific Coordinator of @Repair3D and @Smartfan projects, participated in the Plastics Circularity Conference 2020, presenting the Design for Reycling (DfR) concept through Additive Manufacturing – 3D Printing Technologies for the products developed within both projects. The event brought together policy makers and representatives from the industry who communicated on a range of […]
16Oct

FAST-Smart 6M Progress Meeting

The 6M Progress Meeting of FAST-Smart Project took place on Wednesday. The project overall concept is centered on scaling up of novel, mass-production nano-manufacturing techniques for synthesis of nano-structured smart materials and component manufacturing for energy harvesting applications. First results were presented and actions were set for the next six months, which will be focused on the upscaling of the […]
15Apr

NTUA establishes a 3D printing hub to fight the pandemic

The National Technical University of Athens (NTUA) established the 3DP-NTUA Hub, to work on the preparation of face shields and other consumables, in order to support the healthcare workers in Greece, in collaboration with dedicated Covid-19 Hospitals, during the difficult fight against the pandemic. Professor Costas Charitidis, Director of RNanoLab of the School of Chemical […]
15Mar

RNANO WILL participate in JEC World 2021

The Research Lab of Advanced, Composite, Nanomaterials and Nanotechnology (R-NanoLab), under the Direction of Prof. Costas Charitidis, will participate in JEC World 2021 which will take place at Paris, on 09-11 March 2021. JEC is the leading International Composites Show, featuring ground-braking novel technologies, unique manufacturing techniques and applications of composites materials. R-NanoLab is kindly […]
15Mar

1Y Repair3D Progress Meeting at IRT Jules Verne

Repair3D Project had its 1st year review meeting hosted by IRT Jules Verne Technocampus Ocean in Nantes, on the 5th and 6th February, 2020. Repair3D partners had the opportunity on these two-days meeting to present all Work Packages and discuss the progress of the project. The agenda included a guided tour of the Technocampus Ocean […]
15Mar

EQUINOX – Results in Brief

Very happy to see the basic outcomes of EQUINOX project published on the @CORDIS_EU website in six languages: https://cordis.europa.eu/article/id/411748-novel-cost-effective-materials-could-replace-stainless-steel